George H Wright Co. is proud to offer safes by the following manufacturers:
AMERICAN SECURITY
AMSEC offers a wide variety of safes including fire safes, floor safes, wall safes, gun safes, burglary/fire combination safes, depository safes and high security safes. Call or email us for pricing.
GARDALL
Gardall Safes are manufactured in Syracuse, New York. We usually can get almost every item Gardall manufactures within a week. Gardall offers a wide variety of safes including depository safes, in-floor safes, wall safes, gun safes, fire safes, and fire/burglary combination safes. Call or email us for pricing.
Safe Ratings
Burglary Ratings
Fire Ratings
- B1 — Theft resistant (minimum security)
- B2 — Underwriters’ Laboratories Residential Security Container label
- B3 — Non-rated anti-theft (incorporates features of high security safes
without a UL rating)- B4 — Underwriters’ Laboratories TL-15 label
- B5 — Underwriters’ Laboratories TL-30 label
- B6 — Underwriters’ Laboratories TL-30X6 or TRTL-30 label
UL Underwriters' Laboratories (UL) - UL is a non-profit, non-bias agency that tests and rates the safety and performance of consumer products. Safes that have earned specific UL ratings will carry a UL label which designates the product's security and fire-protection ratings.
- FR — Fire resistant unrated insulated safe
- 1/2 hr — UL class 350. Protects valuables for up to 30 minutes with outside temperature of 1550 degrees.
- 1 hr — UL class 350. Protects valuables for up to 1 hour with outside temperature of 1700 degrees.
- 1 hr+ — UL class 350. Protects valuables for up to 1 hour with an outside temperature of 1700 degrees, plus survived drop test from 30 feet.
- 2 hr — UL class 350. Protects valuables for up to 2 hours with an outside temperature of 1850 degrees.
- 2 hr+ — UL class 350. Protects valuables for up to 2 hours with outside temperature of 1850 degrees, plus survived drop test onto rubble from 30 feet
Fire Ratings
- Net Working Time - This is the UL term for testing time which is spent trying to break into a safe using tools such as diamond grinding wheels, high-speed drills with pressure applying devices, or common hand tools such as hammers, chisels, saws, and carbide-tip drills. If a safe has been rated with a 30-minute net working time, (TL30), the rating certifies that the safe successfully withstood a full 30 minutes of attack time with a range of tools.
- Theft resistant - This rating means the safe provides a combination lock and minimal theft protection.
- Residential Security Container rating (RSC) - This UL rating is based on testing conducted for a net working time of five minutes, on all sides, with a range of tools.
- TL-15 rating - The TL-15 rating means the safe has been tested for a net working time of 15 minutes using high speed drills, saws and other sophisticated penetrating equipment.
- TL-30 rating - A product carrying the TL-30 security label has been tested for a net working time of 30 minutes with the same types of tools mentioned above.
- TL-30 x 6 - The TL-30 (30-minute) test is conducted on all six (6) sides of the safe.
- TRTL-30 - The TRTL rating designates a safe which successfully resisted 30 minutes of net working time with a torch and a range of tools which might include high speed drills and saws with carbide bits, pry bars, and other impact devices.
- Impact test - The UL impact test calls for the safe to be heated to 1550 degrees for 30 minutes (1638 degrees for a 2-hour fire rated safe) then dropped onto concrete rubble from a height of 30 feet. The safe is then turned upside down and reheated for another 30 minutes (45 minutes for a 2-hour fire rated safe). During this process, it must maintain its integrity and protect all contents in order to pass the UL impact test.
- Explosion hazard test - All UL fire-rated safes must undergo this test, during which the unit is inserted into a pre-heated 2000 degree oven. If the safe is not constructed properly, the rapid heating will likely cause an explosion.
- FR - Fire resistant, unrated insulated safe - This product is awaiting UL approval.
- Class 350 1/2-hour fire rating - During this test, the safe is heated for one-half hour to reach an exterior temperature of 1550 degrees. Because paper will begin to char at approximately 400 degrees, the unit being tested must maintain an interior temperature of less than 350 degrees during heat-up and cool-down testing in order to earn its rating.
- Class 350 1-hour fire rating - To earn this rating, the safe is heated for one hour to reach an exterior temperature of 1550 degrees, then put through the cool-down test. During this time the safe must maintain an interior temperature of less than 350 degrees.
- Cool-down test - This procedure is a key part of UL's fire testing procedures. After a one- or two-hour fire rating test, the safe is left in the oven for cool-down time with the heat turned off. Because of the intensive heat of one- and two-hour tests, the temperature inside the safe will continue to rise for up to one hour after the oven is turned off. To pass UL testing, the safe's interior temperature may not exceed 350 degrees at any time during heat-up or cool-down procedures.
- Class 350 1-hour fire & impact label - The safe has passed both UL impact testing and Class 350 1-hour fire testing (see above).
- Class 350 2-hour fire rating - The safe is heated for two hours to reach an exterior temperature of 1550 degrees and must maintain an interior temperature of less than 350 degrees to earn this rating. Class 350 2-hour rating and impact label - The safe has passed both UL impact testing and Class 350 2-hour fire testing (see above).